Posts Tagged ‘Via Bike’

Via Bike: Basic bike infrastructure #ghcc

Tuesday, May 10th, 2011 by

The presence (or absence) of bicycle infrastructure is a key concern among bicyclists (or would-be bicyclists). Study after study demonstrates that the best way to increase bicycling is to expand bicycling infrastructure. While it may not look like Copenhagen just yet, our region enjoys a variety and growing amount of bicycle infrastructure.

Here, we review the various forms of bike infrastructure (also called bike facilities) and how best to use them.

Bike Lane

Bike Lane

Bike lanes provide four to five feet of dedicated lane space for bicyclists on the road. They have solid white lines that designate a clear separation between bikes and cars. These lines may become dashed or disappear at intersections. Don’t be lulled into a false sense of security in a bike lane; watch for opening doors, turning cars and other bicyclists. If you need to, move out of the bike lane and use the adjacent travel lane.

Some bike lanes are buffered from adjacent traffic with extra space designated with painted striping.

Green Bike Lane

Green Bike Lane

Green bike lanes are painted in conflict-prone sections of bike lanes to alert bicyclists and motorists to expect their paths to cross.

Sharrow

Sharrow

Sharrows are a newer lane marking that are derived from the two words “share” and “arrow.” Practically, sharrows communicate that motorists should expect to see and share the space with bicycles.

They are most often used on common bicycle routes where dedicated bicycle lanes are not feasible.

Bike Box at 12th & Union

Bike Box

Bike boxes are used to reduce intersection conflicts, particularly where bicyclists are going straight and motorists are turning right. By positioning bicyclists at the very front of the intersection and preventing right turns on red, bike boxes reduce “right hook” crashes.

Of course, shared use trails are nearly everyone’s favorite bike infrastructure. Trails are completely separated facilities for use by bicyclists and pedestrians. Trails such as the Burke-Gilman Trail, Interurban Trail, or I-90 Trail are popular for both transportation and recreation because they are car-free. However, trail design and conditions still require attention to safety among all users.

• Show courtesy to all users.

• Always yield to pedestrians.

• Give an audible warning when passing pedestrians or other bicyclists.

• Pass only on the left.

• Observe speed limits (~ 15 mph on most trails)

• Reduce speed in congested areas, especially when passing children or leashed pets.

• Single file is safer, especially in congested areas.

Via Bike! Basic bicycle handling #ghcc

Wednesday, May 4th, 2011 by

Mastering a few basic bike handling skills will enhance your safety, efficiency, and enjoyment.  Especially in traffic, riding  predictably and confidently sends the message that you belong on the road.  Here, we’ll break down some basic bike handling skills into simple steps.

Cascade Bicycle Club offers a variety classes, including skills clinics that will boost your bike handling skills and confidence. Check out our upcoming offerings or learn how to bring these to your worksite.

START strong A position of power

A good start means setting off so that you are gradually increasing your speed, riding in a straight line, and maintaining stability.

1. Engage both brakes while you’re stopped.

2. Position one pedal in the 2 o’clock “power position”.

3. Transfer all your weight to this pedal; then release the brakes to set off.

4. Stand up on the pedal and simultaneously ease yourself back onto the saddle.

5. Keep your grip on the handlebars firm but relaxed so you will not wobble.

6. As you gain speed, shift to higher gears.

STOP safely

Stopping is arguably more important than going when it comes to safe riding. Stopping can also enhance your street cred.

1. Free one foot if you use toe clips, straps or clipless pedals.

2. To slow, apply both brakes evenly and gradually. Your dear old dad probably told you never to use your front brakes, but your front brakes actually accounts for 70% of your braking power. We’ll address emergency stops (which can flip you over) in an upcoming column.

3. As you slow, shift down a few gears to make it easier to start up again.

4. Just as you come to a complete stop, turn the handlebars slightly. The bike will lean slightly, making it easier to step down.

5. Step down off the seat and put one foot down. You will find that one side is more natural than the other. Putting your foot down sends a clear message that you are stopping to other cyclists, motorists and law enforcement.

6. As you are stopped, reposition your pedal into the power position so that you are ready to start again.

RIDE in a straight line

This important skill may sound simple, but it is an essential aspect of riding predictably.

1. Use small adjustments of the handlebars and leaning your bike to correct your line.

2. Look up and ahead rather than staring at your front tire.

3. Do not weave in and out of parked cars as you ride along. Hold your line.

SCAN for traffic

Whether you are riding in traffic or on a trail, you need to be aware of and communicate with those around you. Scanning behind for overtaking traffic is especially crucial when merging or changing lanes. The trick is to maintain a straight line while looking over your shoulder.

1. Relax or remove the hand on the side you are scanning to avoid turning the handlebars as you scan. Some riders rest that hand on their thigh or hip.

2. Slightly tighten your grip on the other hand for balance and control.

3. Briefly turn your head to look over your shoulder to scan behind you. You may need to do this a few times.

SIGNAL your intentions

A large part of riding predictably is letting others know what you plan to do before you do it. Hand signals are a vital communication tool. Always signal your intent when turning, changing lanes and changing position within the lane. This goes for bike lanes and trails, too.

There are actually two ways to signal a right turn, show below. Use the hand that is most visible to your audience. For example, if you want to merge from the center lane into the right lane, the alternative righthand signal would be most visible to those vehicles in the right lane.

Left signal Right signal Alternative right signal

Portions of this material are based on the League of American Bicyclists‘ Traffic Skills 101 © 2008